I-Tungsten Carbide Surface Milling Insert For Aluminium ingots Machining

Incazelo emfushane:

Ukulawula Usayizi Onembile
- Ukuhlangabezana nezidingo eziqondile, ukuqinisekisa ukunemba nokunemba.

Ukuqina Okuphezulu Nokumelana Nokuqhekeka
-Ukuqinisekisa ukuzinza nokwethembeka.

I-Hot Isostatic Pressing (HIP) Sintering Process
-Impahla iminyene ngokulinganayo, inobuciko bezinga eliphezulu.

Ukukhiqiza Okuzenzakalelayo Okuthuthukile
-Ikhwalithi engaguquki, ukusebenza kahle okuthuthukiswe kakhulu.

Ukusekela Ukucaciswa Okuhlukahlukene kanye Nezinketho Zokwenza Ngokwezifiso
- Ukuhlinzeka ngezidingo ezahlukahlukene, kuhlinzeka ngezinketho eziningi.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Incazelo

I-Face Milling Cutter Ye-Aluminium Ingot

Ukubuka konke komkhiqizo:
I-aluminium ingot face milling cutter yakhelwe ukugaya ngaphezulu ngaphambi kokuginqika okushisayo
inqubo ye-aluminium ingots.I-aluminium material face milling cutter series ihlanganisa ama-rough
ama-milling cutter, ama-milling cutter anembayo, kanye nama-milling cutters
isetshenziselwa ukugaya ngobuningi bezikhala ezingenalutho.Isisiki sokugaya esinembayo sisetshenziselwa ukwenza ngcono
ubushelelezi obuphezulu be-aluminium ingots.I-milling cutter eboshiwe ithuthukisa ukumelana nokuguga kanye nokuphila kwama-blades.

Izici Zomkhiqizo:
1, Unqenqema lokugaya lubukhali, okuholela endaweni ebushelelezi ku-ingot ye-aluminium egayiwe, enhle.
ukucubungula ukuzinza.
I-2, i-blade inokuminyana okuphezulu nokuzinza, enikeza ukumelana nomthelela omuhle kakhulu nokumelana nokugqoka.3, Indawo ye-blade inokushelela okuhle, iqinisekisa inqubo yokugaya enganamatheli futhi engashi.

I-Rough Milling Cutter:

Ikhodi ye-oda	Ubukhulu(mm
Ikhodi ye-oda	L	R	d	S	s1
I-JT6206-L	37.4	3	7	8	2

Ikhodi ye-oda	Ubukhulu(mm)
Ikhodi ye-oda	L	R	S	S1	S2	d	d1
I-JT6206-M	30	3	8	2.4	0.65	8.2	7.2

Qedela uMsiki Wokugaya:

Ikhodi ye-oda	Ubukhulu(mm)
Ikhodi ye-oda	L	L1	R	R1	S	S1	d
I-JT6027	37.4	37.08	3	730	8	2	7.4

I-Coated Milling Cutter:

Uhlu Lwebanga

Ibanga	Ikhodi ye-ISO	I-Physical Mechanical Properties (≥)			Isicelo
Ibanga	Ikhodi ye-ISO	Ukuminyana g/cm3	Ukuqina(HRA)	TRS N/mm2	Isicelo
YG3X	K05	15.0-15.4	≥91.5	≥1180	Ifanele ukwenziwa ngokunemba kwensimbi ekhonjiwe nezinsimbi ezingezona ayoni.
YG3	K05	15.0-15.4	≥90.5	≥1180
YG6X	K10	14.8-15.1	≥91	≥1420	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi esakazwayo nezinsimbi ezingenayo ayoni, kanye nokucutshungulwa kwensimbi ye-manganese nensimbi ecishiwe.
YG6A	K10	14.7-15.1	≥91.5	≥1370
YG6	K20	14.7-15.1	≥89.5	≥1520	Ifanele ukuqedwa kancane kanye nomshini omahhadlahhadla wensimbi eyinsimbi nama-alloys alula, futhi ingasetshenziselwa umshini omahhadlahhadla wensimbi yokusansimbi kanye nensimbi ye-alloy ephansi.
YG8N	K20	14.5-14.9	≥89.5	≥1500
YG8	K20	14.6-14.9	≥89	≥1670
YG8C	K30	14.5-14.9	≥88	≥1710	Ifanele ukumba amatshe azungezayo kanye nezingcezu zokumba amatshe.
YG11C	K40	14.0-14.4	≥86.5	≥2060	Ifanele izingcezu zamazinyo amise okweshizolo noma ayisiyingi emishinini yokumba amatshe esindayo ukuze ibhekane nokwakheka kwamadwala aqinile.
YG15	K30	13.9-14.2	≥86.5	≥2020	Ifanele ukuhlolwa okuqinile kwezinsimbi zensimbi namapayipi ensimbi ngaphansi kwezilinganiso zokucindezela okuphezulu.
YG20	K30	13.4-13.8	≥85	≥2450	Ifanele ukwenza isitembu siyafa.
YG20C	K40	13.4-13.8	≥82	≥2260	Ifanele ukwenza isitembu esibandayo nokucindezela okubandayo kuyafa ezimbonini ezifana nezingxenye ezijwayelekile, ama-bearing, amathuluzi, njll.
YW1	M10	12.7-13.5	≥91.5	≥1180	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi engagqwali kanye nensimbi evamile yealloy.
YW2	M20	12.5-13.2	≥90.5	≥1350	Ifanele ukuqedwa kancane kwensimbi engagqwali kanye nensimbi ye-alloy ephansi.
YS8	M05	13.9-14.2	≥92.5	≥1620	Ifanele ukwenziwa ngokunemba kwensimbi, ama-alloys asekelwe ku-nickel okushisa okuphezulu, nensimbi enamandla amakhulu.
YT5	P30	12.5-13.2	≥89.5	≥1430	Ifanele ukusika umsebenzi osindayo wensimbi ne-cast iron.
YT15	P10	11.1-11.6	≥91	≥1180	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi nensimbi yokusansimbi.
YT14	P20	11.2-11.8	≥90.5	≥1270	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi nensimbi ecijile, enesilinganiso sokuphakelayo esimaphakathi.I-YS25 iklanyelwe ngokukhethekile ukusebenza kokugaya ensimbi nensimbi.
YC45	I-P40/P50	12.5-12.9	≥90	≥2000	Ifanele amathuluzi okusika umsebenzi osindayo, ohlinzeka ngemiphumela emihle kakhulu ekuguquleni ama-castings nama-forging ensimbi ahlukahlukene.
YK20	K20	14.3-14.6	≥86	≥2250	Ifanele inlaying izingcezu zokumba amatshe ajikelezayo kanye nokubhoboza amatshe aqinile futhi aqinile uma kuqhathaniswa.