I-Tungsten Carbide Fiber Optic Cleaver Replacement Blades

Incazelo emfushane:

I-High Wear Resistance kanye Nento Enzima Kakhulu
- Ukuqinisekisa ukuqina okuhlala isikhathi eside kanye nokuphila okuthembekile.

Ukulawula Usayizi Onembile
- Ukuhlangabezana nezidingo eziqondile, ngokunemba nokunemba.

Ukuqina Okuphezulu Nokumelana Nokuqhekeka
-Ukuqina okuphezulu kanye nokumelana nokuqhekeka.

Inqubo ye-HIP Sintering
-Impahla iminyene ngokulinganayo, inobuciko bezinga eliphezulu.

Ukukhiqiza Okuzenzakalelayo Okuthuthukile
-Ikhwalithi engaguquki, ukusebenza kahle okuthuthukiswe kakhulu.

Ukusekela Ukucaciswa Okuhlukahlukene kanye Nezinketho Zokwenza Ngokwezifiso
- Ukuhlinzeka ngezidingo ezahlukahlukene, kuhlinzeka ngezinketho eziningi.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Incazelo

I-Universal for Hot Fusion/Cold Connection.Ihambisana no-98% wemikhiqizo yamathuluzi okusika emakethe (Fujikura CT-06 CT-08 CT-30 CT-50, Sumitomo FC-6S FC-8R, Furukawa S-326, Inno V7, Jilong KL-21L, njll.) .Ukufakwa kalula, imijikelezo yokusika ende, ukusika okunembile nge-engeli<0.5°.Insimbi ye-tungsten ecwebe kakhulu iqinisekisa ukusika okunembayo, ukumelana nokugqokwa okuhle kakhulu, nobuciko bobuciko obucophelelayo.Isebenza kakhulu kumathuluzi okusika ezinhlobonhlobo ze-fiber optic brand.

Uhlu Lwebanga

Ibanga	Ikhodi ye-ISO	I-Physical Mechanical Properties (≥)			Isicelo
Ibanga	Ikhodi ye-ISO	Ukuminyana g/cm3	Ukuqina(HRA)	TRS N/mm2	Isicelo
YG3X	K05	15.0-15.4	≥91.5	≥1180	Ifanele ukwenziwa ngokunemba kwensimbi ekhonjiwe nezinsimbi ezingezona ayoni.
YG3	K05	15.0-15.4	≥90.5	≥1180
YG6X	K10	14.8-15.1	≥91	≥1420	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi esakazwayo nezinsimbi ezingenayo ayoni, kanye nokucutshungulwa kwensimbi ye-manganese nensimbi ecishiwe.
YG6A	K10	14.7-15.1	≥91.5	≥1370
YG6	K20	14.7-15.1	≥89.5	≥1520	Ifanele ukuqedwa kancane kanye nomshini omahhadlahhadla wensimbi eyinsimbi nama-alloys alula, futhi ingasetshenziselwa umshini omahhadlahhadla wensimbi yokusansimbi kanye nensimbi ye-alloy ephansi.
YG8N	K20	14.5-14.9	≥89.5	≥1500
YG8	K20	14.6-14.9	≥89	≥1670
YG8C	K30	14.5-14.9	≥88	≥1710	Ifanele ukumba amatshe azungezayo kanye nezingcezu zokumba amatshe.
YG11C	K40	14.0-14.4	≥86.5	≥2060	Ifanele izingcezu zamazinyo amise okweshizolo noma ayisiyingi emishinini yokumba amatshe esindayo ukuze ibhekane nokwakheka kwamadwala aqinile.
YG15	K30	13.9-14.2	≥86.5	≥2020	Ifanele ukuhlolwa okuqinile kwezinsimbi zensimbi namapayipi ensimbi ngaphansi kwezilinganiso zokucindezela okuphezulu.
YG20	K30	13.4-13.8	≥85	≥2450	Ifanele ukwenza isitembu siyafa.
YG20C	K40	13.4-13.8	≥82	≥2260	Ifanele ukwenza isitembu esibandayo nokucindezela okubandayo kuyafa ezimbonini ezifana nezingxenye ezijwayelekile, ama-bearing, amathuluzi, njll.
YW1	M10	12.7-13.5	≥91.5	≥1180	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi engagqwali kanye nensimbi evamile yealloy.
YW2	M20	12.5-13.2	≥90.5	≥1350	Ifanele ukuqedwa kancane kwensimbi engagqwali kanye nensimbi ye-alloy ephansi.
YS8	M05	13.9-14.2	≥92.5	≥1620	Ifanele ukwenziwa ngokunemba kwensimbi, ama-alloys asekelwe ku-nickel okushisa okuphezulu, nensimbi enamandla amakhulu.
YT5	P30	12.5-13.2	≥89.5	≥1430	Ifanele ukusika umsebenzi osindayo wensimbi ne-cast iron.
YT15	P10	11.1-11.6	≥91	≥1180	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi nensimbi yokusansimbi.
YT14	P20	11.2-11.8	≥90.5	≥1270	Ifanele ukwenziwa kwemishini enembile kanye nokuqedwa kancane kwensimbi nensimbi ecijile, enesilinganiso sokuphakelayo esimaphakathi.I-YS25 iklanyelwe ngokukhethekile ukusebenza kokugaya ensimbi nensimbi.
YC45	I-P40/P50	12.5-12.9	≥90	≥2000	Ifanele amathuluzi okusika umsebenzi osindayo, ohlinzeka ngemiphumela emihle kakhulu ekuguquleni ama-castings nama-forging ensimbi ahlukahlukene.
YK20	K20	14.3-14.6	≥86	≥2250	Ifanele inlaying izingcezu zokumba amatshe ajikelezayo kanye nokubhoboza amatshe aqinile futhi aqinile uma kuqhathaniswa.